
Everything we forge, in one place
37 items across three ranges. Sizes from 1/8 inch NB to 48 inch NB, classes 150 through 2500, and anything outside that made to your drawing.
01 · 15 items
Flanges
Every flange on this list is forged, machined and certified in house. We hold the ANSI range as standard and cut DIN and BS series to order.

01Weld Neck FlangesWelded at the neck rather than the hub, so the butt weld can be radiographed like any other…

02Slip On FlangesSlipped over the pipe end and fillet welded inside and out.

03Blind FlangesBlanks off the end of a pipeline, a valve or a pump, and doubles as an inspection cover.

04Lap Joint FlangesRuns loose behind a stub end or taft, so the stub end makes the face and the flange only…

05Threaded FlangesScrews onto threaded pipe with no welding at all.

06DIN FlangesFlanges to the DIN series rather than ANSI, for plant and equipment built to European standards.

07Socket Weld FlangesCounterbored to take the pipe before it is fillet welded.

08Plate FlangesPlate flanges for sealing the end of a pipeline, a valve or a connection, with raised face and…

09Blank FlangesBlank flanges for sealing the end of a line or a connection, cut from quality plate and…

10Alloy FlangesFlanges in alloy steel for oil and gas, petrochemical and power generation service, where the…

11Buttweld Pipe FlangesPipe flanges for joining two pipes, or a pipe to a tee, valve, choke or item of equipment.

12Spectacle FlangesSpectacle blinds, spacers and blanks for positive isolation, used in waterworks…

13Screwed FlangesAttached to the pipe by thread rather than weld, for low pressure, non-critical service and for…

14Welded FlangesWelded to the pipe end so the line can be bolted to a matching flange.

15Forged Steel FlangesFlanges forged from bar rather than cut from plate, which gives a continuous grain flow and a…
02 · 10 items
Forged Fittings
Small bore work, where the branch connection has to hold the rating of the header. Forged from solid, machined and pressure tested.

01NipoletsNipolets at 3000 lb for small bore branch connections, especially vents, drains and instrument…

02Swaged NipoletsSwaged nipolets at 3000 lb, giving a reduced outlet from a larger run in one forged piece…

03SockoletsSockolets at 3000 lb and 6000 lb for socket welded branch connections, with run pipe sizes up…

04ThreadoletsThreadolets at 3000 lb and 6000 lb for threaded branch connections, in schedules from SCH40 and…

05Union FittingsUnions at 3000 lb in ferrous and non-ferrous grades, giving a break point in the line that can…

06Reducer InsertsReducer inserts at 3000 lb and 6000 lb, letting a socket weld fitting take a smaller pipe than…

07Socket Weld FittingsSocket weld fittings for small bore lines where the pipe seats into a counterbore and is fillet…

08Forged Threaded FittingsForged threaded fittings for small bore work that has to be assembled without welding, on…

09Plugs & BushingsHex plugs and bushings for isolating a line during repair, maintenance or testing, and for…

10OletsBranch outlet fittings that weld directly onto the run pipe, removing the need for a…
03 · 12 items
Buttweld Fittings
Butt welded into the run so the bore stays continuous. Supplied to the schedule of the pipe it joins, seamless or welded.

0190° ElbowA 90 degree change of direction in the run, butt welded into the line so the bore stays…

0245° ElbowA 45 degree turn where a full quarter bend would be too tight or would cost head loss.

03180° ElbowA full return bend, used where the line has to double back on itself in a heater coil, a heat…

04Equal Tee & CrossEqual tees and crosses for branch connections where the branch matches the header size.

05Unequal Tee & CrossReducing tees and crosses for a branch smaller than the header.

06Pipe ReducersConcentric and eccentric reducers for a change of bore in the run.

07Caps & Stub EndsCaps for closing the end of a run, stub ends for lap joint assemblies.

08Buttweld DimensionsDimensional reference for our buttweld range, covering the manufacturing process and the…

09Alloy Steel ReducerReducers in alloy steel for service where the upstream bore is larger than the downstream side…

10Buttweld TeeButtweld tees in graded steel for branch connections on process, utility and plant piping.

11Forged ElbowForged elbows for high temperature and corrosive duty, with the angular bend held to…

12Stub EndsStub ends used with backing flanges in place of a welded flange, so the joint can be broken and…

Have a drawing or a line list?
Send it across with the grade, the class and the quantity. We come back with sizes, lead time and a price.