WerkzwiseSend an enquiry
ProductsIndustriesQualityAboutContactFlangesForged FittingsButtweld Fittings

Correctness at each step of the cycle

Understanding what the customer needs and then supplying exactly that is a quality problem before it is a commercial one. Quality assurance and quality control run across supply, operations and marketing alike.

Quality policy

Strict, and
applied everywhere

A strict quality assurance system runs in every department, and total quality management is applied to streamline the procedures and practices in operation. The point is a high standard of efficiency that holds when volumes rise.

Continuous effort goes into improving materials technology and equipment, so that the best quality product can be supplied at the most affordable price. Those two things are usually treated as opposites. We treat them as the same problem.

Inspection bay with calipers, hardness tester and ultrasonic probe
Four controls

What the QA
department does

The quality assurance department oversees the important quality functions and performs the activities below on every order.

01Incoming material

The system controls the quality of all incoming material against the raw material test certificate. Each size is randomly checked for chemical and physical properties at a government approved laboratory.

02Forming and heat treatment

During forming, pressing, forging and heat treatment, the process control system sets out the in-process checks and the controls to be followed, including testing.

03Dimensional accuracy

Suitable fixtures and templates hold dimensional accuracy. Gauges and callipers are calibrated periodically so the readings stay honest.

04Certification

Fittings are supplied with a test certificate to the approved QAP, covering chemical composition, mechanical properties, hardness, heat treatment detail, ultrasonic and radiography results, and stamping.

Documentation

What the certificate
actually carries

Fittings are supplied with a test certificate as per the approved QAP. It carries the following, along with the stamping detail so the part can be traced back.

Chemical composition

Full analysis reported against the grade specification.

Mechanical properties

Tensile, yield and elongation as the standard requires.

Hardness

Recorded on the certificate for every heat.

Heat treatment detail

Cycle and condition stated, not just the fact that it was done.

Ultrasonic testing

Where the QAP or the customer calls for it.

Radiography

Reported alongside the other results on the same certificate.

Need a QAP reviewed before you order?

Send the plan across. We will confirm what we can meet in house and what needs a third party endorsement.

Send an enquiryinfo@werkzwise.in